Taking too long? Close loading screen.

Concrete Canal / Road Lining Paver

Concrete Canal Lining Paver

LIPI ENGINEERS introduces electrical concrete lining Paver, exclusively designed for finishing of the laid concrete in preferred thickness & prepare a level of finished concrete layer. LIPI ENGINEERS Concrete Lining Paver is widely used for pavement of concrete road, canal, Airport Runway roads, Flooring, Reservoir and Bridges etc. It consist of sturdy frame structure made from M.S. plate, pipes & angle etc. The frame are usually made in standard length of 1220mm, 1830mm, 2440mm and 3660mm for easy handling.


It is a structure made from M.S. Sheet, pipe, wooden planks with four wheel, specially designed for manual finishing work on canal & groove of longitudinal & transverse section. It is a lightweight and manual driven structure suitable to Paver.

Concrete Road Lining Paver

  • Salient Features
  • Technical Specification
  • Light weight construction for easy erection and transportation from site to site.
  • User Friendly, fast and accurate control.
  • Advanced energy efficient electric drive system with step less speed control.
  • The Special under carriage consist of a spreader auger to spread the concrete to level.
  • Finishing Roll bracket equipped with vibrator to achieve better finishing.
  • The Forward and reverse motion of the machine is controlled by electrically operated bogie.
  • Adjustable carriage movement with variable speed drive.
  • Pin connected main frame available in length 1220mm, 1830mm, 2440mm and 3660 mm.

Prime Movers

  • 5HP Geared Motor : Drive end Panel
  • 5HP Geared Motor : Vibratory Cylinder
  • 1HP Geared Motor : Bogie 1 RH + 1 LH
  • 1HP Electric Motor : Vibratory Cylinder

Machine Controls

  • Adjustable Carriage movement with variable speed drive
  • Over Load Protection

Traction System

  • Traction Drive : Two Electrical Driven double flange bogie wheels.
  • Traction Speed : 0-22 RPM


  • Frame: All welded pin connected main frame available in length 1220, 1830, 2440, 3050, 3660mm.
  • Finishing Width: Finishing width normally 1.2 meter (less than frame width) and adjustable from 1 meter to 25 meter.

Vibratory Cylinder under carriage

  • Finishing Cylinder Ø 270 mm, 1220mm Long Precisely balanced.
  • Hardened flights auger (1 RH & 1 LH) extra Long.
  • Finishing Tolerance: ± 5 mm.


  • Longitudinal & Transvers Groove Cutter
  • Needle Vibrator
  • PAN Vibrator
  • Slope Wedges
  • Longitudinal & Transvers PVC inserter / Attachment

Call us

Mr Sanjay Raval – +91 97120 33322
Mr Poojan Raval – +91 98980 33322

Email us


Reach us

26, Akshar industrial Park, Ramol Police Choky to Hathijan Road, Near Hathijan circle, Vatva GIDC, Phase-4, Ahmedabad-382445